http://phpbb2.turbotimelounge.us/phpBB3/

robert goodwin's build
http://phpbb2.turbotimelounge.us/phpBB3/viewtopic.php?f=3&t=1521
Page 4 of 4

Author:  e-rue [ Tue Jul 28, 2009 10:49 am ]
Post subject:  Re: robert goodwin's build

Image

Image

Image

Image

Image

Image

e

Author:  hawk-eye james [ Tue Dec 15, 2009 9:02 pm ]
Post subject:  Re: robert goodwin's build

aww you guys shoulda called, i would have been happy to help

Author:  e-rue [ Sat Oct 30, 2010 6:33 pm ]
Post subject:  Re: robert goodwin's build

turbo had a seal issue, and we had to get a new cartridge for it. unfortunately garrett makes their crap non rebuildable now so we were forced to buy a new one. rather than get trapped in that situation in the future we used an American made rebuildable cartridge, thats rebuildable, and also has a slightly larger lightweight billet compressor wheel. while it was apart i also fixed the sloppy casting mismatch in the ATP exhaust housing. the wastegate hole was offcentered and had a slight overboost issue. i opened the hole up and centered it over the puck on the flapper. there was also a mismatch on the exhaust inlet, so i fixed that as well...... also touched up a few rough spots right behind the turbine.

Image

Image

e

Page 4 of 4 All times are UTC-04:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/